Motorola V3229 Operating Instructions - Page 127
Data Link Flow, Control, Break Control
View all Motorola V3229 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
5 Asynchronous Operating Commands Data Link Flow Control \G Table 54: Command Operation \X Process but do not pass XON/XOFF characters to remote DCE* \X1 Process and pass XON/XOFF charac- ters to remote DCE *default Enables or disables flow control used to pace data sent from the remote modem to the local modem during a normal connection. When AT\G1 is set, the modem uses XON/XOFF to start / stop data transmission from the remote modem. This command is ignored during a reliable connection. Break Control \Kn Table 55: Command Operation \G Disable data link flow control* \G1 Enable data link flow control *default Use AT\Kn (n =0-5) to indicate the action taken by the modem when a break is encountered. V.3229 / V.3229L -63
V.3229 / V.3229L
<C#>-63
5
Asynchronous Operating Commands
*default
Data Link Flow
Control
\G
Enables or disables flow control used to pace data
sent from the remote modem to the local modem
during a normal connection. When AT\G1 is set,
the modem uses XON/XOFF to start / stop data
transmission from the remote modem.
This com-
mand is ignored during a reliable connection.
*default
Break Control
\Kn
Use
AT\Kn
(n =0-5)
to indicate the action taken
by the modem when a break is encountered.
Table 54:
Command
Operation
\X
Process but do not pass XON/XOFF
characters to remote DCE*
\X1
Process and pass XON/XOFF charac
-
ters to remote DCE
Table 55:
Command
Operation
\G
Disable data link flow control*
\G1
Enable data link flow control