Motorola V3229 Operating Instructions - Page 251
<C#>-R, V.3229 / V.3229L, <Reference>, Command Index and Defaults
View all Motorola V3229 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Command Index and Defaults ¥PROTOCOL OPTIONS LAPM protocol disabled * MNP protocol disabled * Direct mode DTE flow control disabled * DCE flow control disabled * XON/XOFF pass through disabled Inactivity timer off Break Option 0 V.42 fast detect disabled * ¥DTE OPTIONS Async data DTE rate = 9600 8 bit No parity Async controlled dialer AT command set enabled Ignores DTR DSR forced high DCD forced high CTS forced high DTE fallback disabled Options retained at disconnect ¥DIAL LINE OPTIONS Tone dial Auto dial #1 Wait for dial tone Wait delay 2 seconds Pause delay 2 seconds Call timeout 30 seconds Answer on 1 ring 801 V.32b timeout long Autocallback disabled ¥SPEAKER OPTIONS Volume medium On until carrier detect -R V.3229 / V.3229L
<C#>-R
V.3229 / V.3229L
<Reference>
Command Index and Defaults
¥
PROTOCOL OPTIONS
LAPM protocol disabled *
MNP protocol disabled *
Direct mode
DTE flow control disabled *
DCE flow control disabled *
XON/XOFF pass through disabled
Inactivity timer off
Break Option 0
V.42 fast detect disabled *
¥
DIAL LINE OPTIONS
Tone dial
Auto dial #1
Wait for dial tone
Wait delay 2 seconds
Pause delay 2 seconds
Call timeout 30 seconds
Answer on 1 ring
801 V.32b timeout long
Autocallback disabled
¥
DTE OPTIONS
Async data
DTE rate = 9600
8 bit
No parity
Async controlled dialer
AT command set enabled
Ignores DTR
DSR forced high
DCD forced high
CTS forced high
DTE fallback disabled
Options retained at disconnect
¥
SPEAKER OPTIONS
Volume medium
On until carrier detect