Motorola V3229 Operating Instructions - Page 93

5 Asynchronous Operating Commands General Commands, ConTto. exit data mode and go to online command mode, press the escape character three times (+ is the default). Pause for the length of time set by register S12 (1 second is the default) before and after the +++ to ensure the modem recognizes the escape command. This sequence temporarily suspends data transmissions and allows command mode operations without disturbing the telephone line connection. The modem responds with OK when it detects the escape code. Return to data mode by entering ATO. Note: The AT command set must be enabled. Local Character Echo E Type AT without a carriage return. If the screen shows AT character echo is correct. Proceed with other commands as desired. If the screen shows AATT enter the ATE command to correct the double characters or disable the local echo on the terminal. If the screen shows no characters, type ATE1 to turn the echo on or enable local echo on the terminal. Table 17: Command E Echo off Operation E1 Echo on* *default V.3229 / V.3229L -29