Netgear GS108T-100NAS GS108T Setup Manual - Page 13
Network with a DHCP Server, Connect the GS108T Smart Switch to a DHCP network.
View all Netgear GS108T-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GS108T Smart Switch Software Administration Manual Network with a DHCP Server To install the switch in a network with a DHCP server, proceed as follows: 1. Connect the GS108T Smart Switch to a DHCP network. 2. Power on the switch by connecting its AC-DC power adapter. 3. Install the SmartWizard Discovery utility on your computer. 4. Start the SmartWizard Discovery utility. 5. Click Discover for the SmartWizard Discovery utility to find your GS108T Gigabit Smart Switch. You should see a screen similar to that shown below. . Figure 1-1 6. Make a note of the displayed IP address assigned by the DHCP server. You will need this value to access the switch directly from a web browser (without using the SmartWizard Discovery utility). 7. Select your switch by clicking on the line that shows it. Then click the Web Access button. The discovery utility displays a login window similar to the following: Getting Started with Switch Management 1-3 v1.0, May 2007