Netgear GS108T-100NAS GS108T Setup Manual - Page 90
EAP Statistics, Resending EAP, Max EAP Requests, Supplicant Timeout, Server Timeout, Termination Cause
![]() |
View all Netgear GS108T-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
GS108T Smart Switch Software Administration Manual • Resending EAP: Defines the amount of time (in seconds) that lapses before EAP requests are resent. The field default is 30 seconds. • Max EAP Requests: Displays the total amount of EAP requests sent. If a response is not received after the defined period, the authentication process is restarted. The field default is 2 retries. • Supplicant Timeout: Displays the amount of time (in seconds) that lapses before EAP requests are resent to the supplicant. The field default is 30 seconds. • Server Timeout: Displays the amount of time (in seconds) that lapses before the device re-sends a request to the authentication server. The field default is 30 seconds. • Termination Cause: Indicates the reason for which the port authentication was terminated, please reference to help age of real device FW V1.0.1_03. 3. Click Apply. EAP Statistics The EAP Statistics page contains information about EAP packets received on a specific port. 1. Click EAP Statistics in the blue navigation panel. A screen similar to that shown below appears. 4-36 v1.0, May 2007 Configuring the Switch
![](/manual_guide/products/netgear-gs108t-gs108t-setup-manual-1-18acb17/90.png)