Netgear GS108T-100NAS GS108T Setup Manual - Page 46
MSAP (Remote) Information, MSAP Information
![]() |
View all Netgear GS108T-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
GS108T Smart Switch Software Administration Manual Table 3-4. MED Set Details (continued) Item Description Power Value Indicates the total power in watts required by a PD device from a PSE device, or the total power a PSE device is capable of sourcing over a maximum length cable based on its current configuration. Network Policy Network policy is associated with multiple sets of application types supported on a given port. • Application Type: Integer value indicating the primary function of the application(s) defined for this network policy, advertised by an Endpoint or Network Connectivity Device. • Unknown Policy Flag: Indicates that an Endpoint Device wants to explicitly advertise that, this policy is required by the device, but is currently unknown. • Tagged Flag: Indicates whether the specified application type is using a tagged or an untagged VLAN. • Reserved: Reserved for future standardization. • VLAN ID: Contains the VLAN identifier (VID) for the port. • L2 Priority: Indicates the Layer 2 priority to be used for the specified application type. • DSCP Value: Contains the DSCP value to be used to provide Diffserv node behavior for the specified application type. MSAP (Remote) Information 1. Click MSAP Information in the blue navigation panel. A screen similar to that shown below appears. 3-22 v1.0, May 2007 Managing System Settings
![](/manual_guide/products/netgear-gs108t-gs108t-setup-manual-1-18acb17/46.png)