Netgear GS108T-100NAS GS108T Setup Manual - Page 95
parameters will be {PORT, VLAN ID, SRC MAC}.
![]() |
View all Netgear GS108T-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
GS108T Smart Switch Software Administration Manual . Figure 4-57 All Source MACs are trusted when Trusted MAC list is empty. • When VLAN setting is in 802.1Q mode (see "IEEE 802.1Q VLAN" on page 4-9), the filter parameters will be {PORT, VLAN ID, SRC MAC}. • When VLAN setting is in Port-based mode (see "Port-Based VLAN" on page 4-13), the filter parameters will be {PORT, SRC MAC}. You can add or delete a MAC address: To add a MAC address: 1. Click Add on the Trusted MAC page. A screen similar to that shown below appears. Configuring the Switch v1.0, May 2007 4-41
![](/manual_guide/products/netgear-gs108t-gs108t-setup-manual-1-18acb17/95.png)
GS108T Smart Switch Software Administration Manual
Configuring the Switch
4-41
v1.0, May 2007
.
All Source MACs are trusted when Trusted MAC list is empty.
•
When VLAN setting is in 802.1Q mode (see
“IEEE 802.1Q VLAN” on page 4-9
), the filter
parameters will be {PORT, VLAN ID, SRC MAC}.
•
When VLAN setting is in Port-based mode (see
“Port-Based VLAN” on page 4-13
), the filter
parameters will be {PORT, SRC MAC}.
You can add or delete a MAC address:
To add a MAC address:
1.
Click
Add
on the Trusted MAC page. A screen similar to that shown below appears.
Figure 4-57