Netgear GS108T-100NAS GS108T Setup Manual - Page 79
Spanning Tree, Ingress Control Mode, Storm Control Rate, Per Port Setting, Apply
View all Netgear GS108T-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
GS108T Smart Switch Software Administration Manual . Figure 4-45 2. Specify the storm control settings: • Ingress Control Mode: Selects the type of the packet storm. The available options include: - Disabled - DLF - Broadcast - Multicast & Broadcast • Storm Control Rate: Used to enter the threshold limit for storm control. • Per Port Setting: Enable or disable the control type for every particular port. 3. Click Apply. Spanning Tree The Rapid Spanning Tree Protocol (RSTP) provides rapid convergence of the spanning tree by assigning port roles and by determining the active topology. The RSTP builds upon the IEEE 802.1D STP protocol to select the switch with the highest switch priority as the root switch. Reconfiguration of the spanning tree can occur in less than 1 second. Configuring the Switch v1.0, May 2007 4-25