Netgear GS108T-100NAS GS108T Setup Manual - Page 57
Speed, 10M Half, 10M Full, 1Gbps Full, Disable, Flow Control, Default Priority, Gbps Full duplex
View all Netgear GS108T-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
GS108T Smart Switch Software Administration Manual . Figure 4-25 ID indicates the port number to control. 3. Specify the new port configuration information: • Speed: Specifies the speed and duplex for the port. The possible entries are: - Auto (auto-negotiation) - 10M Half (10 Mbps half duplex) - 10M Full (10 Mbps full duplex) - 100M Half (100 Mbps half duplex) - 100M Full (100 Mbps full duplex) - 1Gbps Full (1 Gbps Full duplex) - Disable (Disable) • Flow Control: Specify whether flow control support is: - On (enabled) - Off (disabled) • Default Priority: Assigns packet priority for packets arriving at the port without tagging. If the packet comes in with tag or priority-tag, the priority is retrieved from the priority field of the tag. Configuring the Switch 4-3 v1.0, May 2007