Netgear MR314 Reference Guide - Page 38
Account Information, Obtaining ISP Configuration Information (Windows)
UPC - 606449022148
View all Netgear MR314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Reference Guide for the Model MR314 Cable/DSL Wireless Router • RoadRunner Not all RoadRunner service areas require a login protocol. If your ISP is RoadRunner, you should ask whether your PC must run a RoadRunner login program. • PPTP PPTP is a VPN client, but it is also used in Europe by Alcatel's ANT system and others as an account login client. • BigPond Authentication After your network and router are configured, the router will perform the login task when needed, and you will no longer need to login from your PC. Account Information Unless these items are dynamically assigned by the ISP, your ISP should give you the following basic information for your account: • An IP address and subnet mask • A gateway IP address, which is the address of the ISP's router • One or more domain name server (DNS) IP addresses • Host name and domain suffix For example, your account's full server names may look like this: mail.xxx.yyy.com In this example, the domain suffix is xxx.yyy.com. If any of these items are dynamically supplied by the ISP, your router automatically acquires them. If an ISP technician configured your PC during the installation of the broadband modem, or if you configured it using instructions provided by your ISP, you need to copy configuration information from your PC's Network TCP/IP Properties window (or Macintosh TCP/IP Control Panel) before reconfiguring your PC for use with the router. These procedures are described next. Obtaining ISP Configuration Information (Windows) As mentioned above, you may need to collect configuration information from your PC so that you can use this information when you configure the Model MR314 router. Following this procedure is only necessary when your ISP does not dynamically supply the account information. To get the information you need to configure the router for Internet access: 3-8 Preparing Your Network