Netgear MR314 Reference Guide - Page 69
To add or edit a Static Route, select a number and click the Edit button to open the Edit Menu
UPC - 606449022148
View all Netgear MR314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Reference Guide for the Model MR314 Cable/DSL Wireless Router To add or edit a Static Route, select a number and click the Edit button to open the Edit Menu, shown in Figure 5-6 Figure 5-6. Static Route Entry and Edit Menu Table 5-6 lists and describes the fields for the IP Static Route Edit menu. Table 5-6. Edit IP Static Route Fields Field Route Name Active Destination IP Address IP Subnet Mask Gateway IP Address Description Enter a descriptive name for this route for identification purposes only. Use this field to activate or deactivate this static route. Enter the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. Enter the subnet mask for this destination. Enter the IP address of the gateway to the destination network. The gateway is the next router that your router contacts in order to forward packets to the destination. On the LAN, the gateway must be a router on the same segment as the router. Over the WAN, the gateway will be the IP address of the router at your ISP. Advanced Configuration of the Router 5-13