Netgear MR314 Reference Guide - Page 59
LAN Setup, DHCP, IP Configuration by DHCP, B-10
UPC - 606449022148
View all Netgear MR314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
LAN Setup Reference Guide for the Model MR314 Cable/DSL Wireless Router The second feature category under the Advanced heading is LAN Setup. This menu allows configuration of LAN IP services such as DHCP and RIP. From the Main Menu of the browser interface, under Advanced, click on LAN to view the LAN Setup menu, shown in Figure 5-1 Figure 5-1. LAN Setup Menu DHCP The Model MR314 router have the capability to act as a DHCP server, allowing them to assign IP, DNS, and default gateway addresses to attached PCs. The assigned default gateway address is the LAN address of the router. IP addresses will be assigned to the attached PCs from a pool of addresses specified in this menu. Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN. See "IP Configuration by DHCP" on page B-10 for an explanation of DHCP and information about how to assign IP addresses for your network. For most applications, the default DHCP and TCP/IP settings of the router are satisfactory. These default settings are: • DHCP server enabled with 32 client addresses starting from 192.168.0.1. Advanced Configuration of the Router 5-3