Netgear MR314 Reference Guide - Page 41
Basic Configuration of the Router, Configuring for Internet Access - turn wireless on
UPC - 606449022148
View all Netgear MR314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 4 Basic Configuration of the Router This chapter describes how to perform the basic configuration of your Model MR314 Cable/DSL Wireless Router using the Setup Wizard, which walks you through the configuration process for your Internet connection. This chapter also describes the configuration for content filtering and reporting. Configuring for Internet Access In order to use the browser-based Web Configuration Manager, your PC must have a web browser program installed such as Microsoft Internet Explorer or Netscape Navigator. Because the Configuration Manager uses Java, your Web browser must be Java-enabled and support HTTP uploads. NETGEAR recommends using Netscape Navigator 3.0 or above. Free browser programs are readily available for Windows, Macintosh, or UNIX/Linux. If you will be using a wireless-connected PC to initially configure the router, you must access the PC's wireless adapter configuration and set the ESSID to the router's default ESSID: Wireless (note the capitalization). Also, you must disable WEP encryption. To configure for Internet access using your browser: 1. Turn on the router and wait for initialization to complete. Allow at least one minute and verify that the TEST LED is off. 2. Reboot your PC to obtain DHCP configuration from the router. 3. Launch your web browser. 4. In the Address box of your browser, type http://192.168.0.1 and press ENTER. Basic Configuration of the Router 4-1