Netgear MR314 Reference Guide - Page 74
The System Status screen shows the parameters listed in, Table 6-1
UPC - 606449022148
View all Netgear MR314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Reference Guide for the Model MR314 Cable/DSL Wireless Router The System Status screen shows the parameters listed in Table 6-1 Table 6-1. System Status fields Field System Name Router Firmware Version WAN Port IP Address IP Subnet Mask DHCP LAN Port IP Address IP Subnet Mask DHCP Description This field displays the Host Name assigned to the router. This field displays the router firmware version. These parameters apply to the Internet (WAN) port of the router. This field displays the IP address being used by the Internet (WAN) port of the router. If no address is shown, the router cannot connect to the Internet. This field displays the IP Subnet Mask being used by the Internet (WAN) port of the router. If set to None, the router is configured to use a fixed IP address on the WAN or to use PPPoE. If set to Client, the router is configured to obtain an IP address dynamically from the ISP. These parameters apply to the Local (WAN) port of the router. This field displays the IP address being used by the Local (LAN) port of the router. The default is 192.168.0.1 This field displays the IP Subnet Mask being used by the Local (LAN) port of the router. The default is 255.255.255.0 If set to None, the router will not assign IP addresses to local PCs on the LAN. If set to Server, the router is configured to assign IP addresses to local PCs on the LAN. 6-2 Maintenance