Netgear MR314 Reference Guide - Page 46
Otherwise leave Service Name blank., Proceed to Step 10. - password
UPC - 606449022148
View all Netgear MR314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Reference Guide for the Model MR314 Cable/DSL Wireless Router 9. Click on Next to go to the ISP Parameters screen, shown in Figure 4-5 below: Figure 4-5. Browser-based Setup Wizard, third screen This screen determines whether a login program will be run. a. If your service provider does not require a login program, leave Encapsulation as Ethernet and proceed to Step 10. b. If your service provider uses PPP over Ethernet (PPPoE), select Encapsulation as PPPoE, and enter these additional parameters: • If your connection supports multiple ISPs, enter the Service Name of the one you use. Otherwise leave Service Name blank. • Enter the PPPoE login user name and password provided by your ISP. These fields are case sensitive. • If you wish to change the login timeout, enter a new value in seconds. Proceed to Step 10. c. European users only: If your service provider uses Alcatel's ANT (ADSL Network Termination) with PPTP as a login method, select Encapsulation as PPTP, and enter these additional parameters: • Enter the PPTP login user name and password provided by your ISP. These fields are case sensitive. • If you wish to change the login timeout, enter a new value in seconds. 4-6 Basic Configuration of the Router