Netgear WAC720 Reference Manual - Page 22
Con a/a-na-ac Wireless Settings, Apply
View all Netgear WAC720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730 Setting Descriptions 11bg modes only Data Rate From the menu, select the transmit data rate of the wireless network. The default setting is Best. For a list of all options that you can select from in 11bg mode, see Factory Default Settings on page 110. Output Power From the menu, select the transmission power of the wireless access point: Full, Half, Quarter, Eighth, Minimum. The default is Full. Note: Increasing the power improves performance, but if two or more wireless access points are operating in the same area and on the same channel, interference can occur. Note: Make sure that you comply with the regulatory requirements for total radio frequency (RF) output power in your country. 6. Click Apply button. Your settings are saved. Note: For information about how to configure advanced wireless settings, see Configure Advanced Wireless Settings on page 76. Configure 802.11a/a-na-ac Wireless Settings To configure the 802.11a/a-na-ac wireless settings: 1. Select Configuration > Wireless > Basic > Wireless Settings. Initial Setup 22