Netgear XSM4324FS Software Setup Manual Software Version 12.x - Page 13

Subnet Mask, Gateway, Apply, System > Management > IPv4 Management Interface Configuration

Get Netgear XSM4324FS PDF manuals and user guides View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

M4300 Intelligent Edge Series Fully Managed Stackable Switches c. In the Subnet Mask field, enter the subnet mask for the switch. For example, enter 255.255.255.0. d. In the Gateway field, enter the network IP address for the gateway. For example, enter 10.100.5.1. e. Click the Apply button. Your settings are saved. 9. To set up the management interface, do the following: a. Select System > Management > IPv4 Management Interface Configuration. b. Select the Configuration Method Manual radio button. c. In the IP Address field, enter the IP address for the management interface. For example, enter 10.100.4.100. d. In the Subnet Mask field, enter the subnet mask for the management interface. For example, enter 255.255.255.0. e. In the Gateway field, enter the default gateway for the management interface. For example, enter 10.100.4.1. f. Click the Apply button. Your settings are saved. 10. Log out of the local browser interface. 11. Return your computer to its original settings. If you want log in to the local browser interface again, you now must use one of the newly assigned network IP addresses. Get Started 13 Software Setup Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
M4300 Intelligent Edge Series Fully
Managed
Stackable Switches
Get Started
Software Setup Manual
13
c.
In the
Subnet Mask
field, enter the subnet mask for the switch.
For example, enter 255.255.255.0.
d.
In the
Gateway
field, enter the network IP address for the gateway.
For example, enter 10.100.5.1.
e.
Click the
Apply
button.
Your settings are saved.
9.
To set up the management interface, do the following:
a.
Select
System > Management > IPv4 Management Interface Configuration
.
b.
Select the Configuration Method
Manual
radio button.
c.
In the
IP Address
field, enter the IP address for the management interface.
For example, enter 10.100.4.100.
d.
In the
Subnet Mask
field, enter the subnet mask for the management interface.
For example, enter 255.255.255.0.
e.
In the
Gateway
field, enter the default gateway for the management interface.
For example, enter 10.100.4.1.
f.
Click the
Apply
button.
Your settings are saved.
10.
Log out of the local browser interface.
11.
Return your computer to its original settings.
If you want log in to the local browser interface again, you now must use one of the newly
assigned network IP addresses.