Home » Netgear Manuals » Hubs & Switches » Netgear XSM4324FS » Manual Viewer

Netgear XSM4324FS Software Setup Manual Software Version 12.x - Page 24

Use the Auto Install Configuration

Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

2 2Use the Auto Install Configuration Auto Install is a software feature that provides for the configuration of a switch automatically when the switch is initialized and no configuration file is found on the switch. This chapter includes the following sections: • Auto Install configuration concepts • Switch IP address assignment concepts • TFTP IP address and configuration file name concepts • About conflicting TFTP server configurations • About DNS server requirements • About obtaining a configuration file • About obtaining an image from a TFTP server through Auto Install • Configure Auto Install 24

Section	Page
M4300 Intelligent Edge Series Fully Managed Stackable Switches	1
Contents	3
1 Get Started	4
Supported switches	5
Available publications	6
Register your switch	6
Overview of the options to access the switch	7
Overview of the local browser interface	7
Start the switch and observe the power-on self-test	8
Prepare a terminal if you intend to use a console port	8
Prepare a computer with terminal emulation software	9
Access the switch through a console port	9
Set up or find the switch IP address configuration	10
Use the local browser interface to set up the IP address configuration	11
Use a console port and the ezconfig utility to set up the IP address configuration	14
Use a console port and the CLI to set up the IP address configuration	19
Find the IP address configuration assigned by a DHCP server	20
Use UPnP or Bonjour to find the switch	20
Access the local browser interface when you know the IP address	22
Configure an SNMPv3 user profile using the local browser interface	22
2 Use the Auto Install Configuration	24
Auto Install configuration concepts	25
Switch IP address assignment concepts	25
TFTP IP address and configuration file name concepts	26
About conflicting TFTP server configurations	26
About DNS server requirements	26
About obtaining a configuration file	27
Host-specific configuration file	27
Default network configuration file	27
About obtaining an image from a TFTP server through Auto Install	28
Configure Auto Install	29
Configure Auto Install through the CLI	30
Configure Auto Install through the local browser interface	30
Monitor and complete the Auto Install process	31