Nikon COOLPIX P610 Reference Manual - Page 196

Display Cannot save to card. No access. Could not connect. Wi-Fi connection terminated. Lens error. Try again after turning the camera off and on. Communications error System error Cause/Solution A A memory card is not inserted. Insert a memory card. 10 The maximum number of log data events that can be saved per day is 36. - Log has not been obtained. E43 The maximum number of log data events that can be saved in one memory card is 100. Replace the memory card with a new one or delete log data that is no longer required from the memory card. 10, E44 The camera could not receive the communication signal from the smart device. Wirelessly connect the camera and smart device again. • Press the q button. • Touch an NFC-compatible smart device to E45, E91 the camera. • Select Connect to smart device in the Wi-Fi options menu. The camera failed to establish the connection while receiving the communication signals from the smart device. Select a different channel for Channel in Options in the Wi-Fi options menu E45, E91 and establish the wireless connection again. The Wi-Fi connection is terminated in the following situations: • Poor connectivity. • The battery level is low. • A cable or a memory card is inserted or removed. Use a fully charged battery, disconnect the TV, computer or printer and establish the wireless connection again. E45, E91 If the error persists, contact your retailer or Nikon-authorized service representative. F7 An error occurred while communicating with the printer. Turn the camera off and reconnect the USB cable. E49 An error occurred in the camera's internal circuitry. Turn the camera off, remove and reinsert the battery, and turn the camera on. If the error F7 persists, contact your retailer or Nikon- authorized service representative. Reference Section E112