Onkyo TX-DS676 Owner Manual - Page 24

Presetting FM/AM radio stations STANDBY/ON STANDBY MULTI SOURCE POWER ON OFF A SPEAKERS B PHONES FM MUTE/MODE TUNING UP/DOWN CHARACTER/MEMORY MULTI CH INPUT DIMMER DISPLAY FM MUTE/ MODE DOWN TUNING UP CHARACTER/ MEMORY SP/SYS AUDIO BASS/ SETUP ADJUSTMENT TREBLE MODE PRESET/MODE ADJ SMART SCAN CONTROLLER DIRECT STEREO LISTENING MODE /DTS THX SURROUND PUSH TO ENTER DSP REC OUT/ DIGITAL/ MULTI SOURCE ANALOG CH LEVEL MODE DVD VIDEO-1 VIDEO-2 VIDEO-3 VIDEO-4 TAPE FM AM PHONO C D DOWN MASTER VOLUME VIDEO4 (MONO) S VIDEO VIDEO L AUDIO R DTR-7 by UP SMART SCAN CONTROLLER 1 FM AM SPEAKERS A FM SPEAKERS A 2 DOWN TUNING UP SPEAKERS A DSP TUNED AUTO FM/AM Tuning in a radio station 1. Press the FM or AM button. 2. Use the TUNING UP/DOWN buttons to change the fre- quency. UP the frequency increases. DOWN........ the frequency decreases. • The frequency changes in 50 kHz steps in FM and 10 kHz (or 9 kHz) in AM each time you press the TUNING UP/DOWN button. • In FM, if this button is held continuously for more than 0.5 seconds,the frequencies are scanned automatically (FM auto tuning made). When a broadcast is received, scanning stops. • The European model allows you to receive RDS broadcasts. See page 46 for details. FM MUTE/ MODE DISPLAY Listening to a stereo radio station (FM mode) When you tune in a stereo FM station, the FM STEREO indicator lights up if the signal is sufficiently strong. If the signal is weak, it may be impossible to tune in to the desired station. In this case, tune in as follows. Press the FM MUTE/MODE button. The AUTO indicator turns off. At this time, the station will be in mono and interstation noise will be heard. Select the station to which you want to listen. DISPLAY button Pressing the DISPLAY button each time will change the indication as follows: Frequency (preset No.) Listening mode 24