Onkyo TX-DS676 Owner Manual - Page 28
Setting the input signal format
View all Onkyo TX-DS676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Selecting an input source 1 DVD VIDEO-1 VIDEO-2 VIDEO-3 VIDEO-4 TAPE FM AM PHONO C D 2 DIGITAL/ ANALOG SPEAKERS A TUNED AUTO PRESET/MODE ADJ PUSH TO ENTER 3 PRESET/MODE ADJ PUSH TO ENTER 4 PRESET/MODE ADJ SPEAKERS A SPEAKERS A PUSH TO ENTER TUNED AUTO TUNED AUTO Setting the input signal format (Digital Input Setup) The input signal format defaults to "Automatic." Although you can use this default setting normally, you may change it depending on the input signal format. Ex.) Setting the input signal format for DVD 1. Press the DVD input selector button. 2. Press the DIGITAL/ANALOG button twice to display the digital input format. Press the SMART SCAN CONTROLLER. You are now able to select the input signal format. 3. By rotating the SMART SCAN CONTROLLER, select the input signal format from among "Automatic," "Digital," "Analog," "PCM," and "DTS." Automatic (Automatic detection) Input signal format (Dolby Digital, DTS, MPEG, or PCM) used in the selected input source is detected automatically to execute the required decoding process. If no digital signal is input, the input signals to the analog input jacks will be played. Digital (Digital input automatic detection) Input digital signal format (Dolby Digital, DTS, MPEG, or PCM) used in the selected digital input source is detected automatically to execute the necessary decoding process. Analog (Analog audio signal processing) The audio signals input from the equipment connected to the analog input jacks are played. PCM (PCM signal processing) A decoding process is executed only when PCM signals are input. DTS (DTS signal processing) A decoding process is executed only when DTS signals are input. Notes: • In "Automatic" or "Digital" mode, if the CD or LD is fast-for- warded during playback, decoded PCM signals may produce skipped sound. In such cases, change the digital audio format to "PCM." • If a CD or LD encoded in the DTS format is played back using "PCM" or "Analog" mode, a noise will be produced. This noise could damage the amplifier and speakers. Always use "Automatic", "Digital", or " DTS" mode when playing back DTS-encoded sources. • MPEG signals can be detected only by models bearing mark on their front panel. (TX-DS777: Other than U.S.A. and Canadian models) (TX-DS676: European model only) 4. Press the SMART SCAN CONTROLLER. This completes the digital audio format setup. 28