Onkyo TX-SR600 Owner Manual - Page 51
Selecting a listening mode
View all Onkyo TX-SR600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Listening Modes Listening mode buttons RCVR MODE Listening mode buttons CINE FLTR Selecting a listening mode • Refer to page 49 for more details of listening modes. • Refer to page 55 for sources and listening modes. • When playing Dolby Digital or DTS software, the listening mode will automatically change to Dolby Digital or DTS. Tip: You can set in advance a different listening mode for each input source. For more details, see page 55. When using the remote controller, first press the RCVR MODE button before preceding to the step below. Press one of the listening mode buttons to select the listening mode. TX-SR700/700E/ 600/600E Remote controller PURE AUDIO (PURE A) (TX-SR700/700E only): Changes the listening mode for the signal type that is currently being input from the selected input source to the Pure Audio listening mode. If pressed, the corresponding setting in the "Input Setup" menu for the selected input source is also changed (see page 54). DIRECT: Changes the listening mode for the signal type that is currently being input from the selected input source to the Direct listening mode. If pressed, the corresponding setting in the "Input Setup" menu for the selected input source is also changed (see page 54). STEREO: Changes the listening mode for the signal type that is currently being input from the selected input source to the Stereo listening mode. If pressed, the corresponding settings in the "Input Setup" menu for the selected input source is also changed (see page 54). SURROUND (SURR): Changes the listening mode for the signal type that is currently being input from the selected input source to the surround mode that matches the signal type (e.g., Dolby Pro Logic II, Dolby Digital, DTS, or DTS Neo:6). If pressed, the corresponding settings in the "Input Setup" menu for the selected input source is also changed (see page 54). If the SURROUND button is pressed • While playing back DTS sources Each time you press the button, the DTS-ES setting switches from: Auto → On → Off. Auto: When a DTS source with a DTS-ES flag (ID signal for DTS-ES) is input, the listening mode changes automatically to DTS-ES Discrete 6.1 or DTS-ES Matrix 6.1. If the DTS source has no DTS-ES flag, the source is played in DTS mode. On: When a DTS source with a DTS-ES flag is input, the listening mode changes automatically to DTS-ES Discrete 6.1 or DTS-ES Matrix 6.1. If the DTS source has no DTS-ES flag, the source is played in DTS-ES Matrix 6.1. Off: DTS sources are always played in the DTS mode. The DTS-ES modes are not used even when the DTS source has the DTS-ES flag. • While playing back Dolby Digital (Multichannel) sources Select whether or not to play back Dolby Digital sources using the matrix 6.1-channel decoder when using surround back speakers. Each time you press the button, the Dolby Digital EX setting switches from: Auto → On → Off. Auto: Sources with an EX flag (ID signal for Dolby Digital) are automatically played back in Dolby Digital EX. If the source has no EX flag, the source is played back in Dolby Digital. On: When a Dolby Digital source with an EX flag is input, the listening mode changes automatically to Dolby Digital EX. If the Dolby Digital source has no EX flag, the source is played in the Dolby Digital EX. Off: Dolby Digital sources are always played in the Dolby Digital. The Dolby Digital modes are not used even when the Dolby Digital source has the EX flag. Be aware that if the surround channel is monaural or there is no surround channel, the source is played back in Dolby Digital regardless of this setting. • While playing back Dolby Digital 2-channel sources Each time you press the button, the Dolby Digital setting switches from: Pro Logic II Movie → Pro Logic II Music. • While playing back Analog/PCM sources Each time you press the button, the Dolby Digital setting switches from: Pro Logic II Movie → Pro Logic II Music → DTS Neo6:Cinema → DTS Neo6:Music. If "None" is selected for the surround speaker setting in the "Speaker Config" menu, DTS Neo:6 Music will not appear. 51