Onkyo TX-SR600 Owner Manual - Page 52
Original filter CinemaFILTER loading for movies
View all Onkyo TX-SR600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Listening Modes ALL ST (remote controller only): Changes the listening mode for the signal type that is currently being input from the selected input source to the All Ch Stereo listening mode. If pressed, the corresponding setting in the "Input Setup" menu for the selected input source is also changed (see page 54). DSP: Changes the listening mode for the signal type that is currently being input from the selected input source as shown below. Orchestra → Unplugged → Studio-Mix → TV Logic → All Ch Stereo → Orchestra. If pressed, the corresponding settings in the "Input Setup" menu for the selected input source is also changed (see page 54). Original filter (CinemaFILTER) loading for movies The CinemaFILTER function gently decreases the level of the extreme high frequencies, compensating for overly-bright sounding motion picture soundtracks. Select this function if the sound from the front speakers is too bright. This function only works in the Dolby Digital, Dolby Digital EX, Dolby Pro Logic II Movie, DTS, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Neo:6 Cinema Surround modes. Press the CINE FLTR button on the remote controller. The current setting is displayed. Press the button again to change the setting. On: The CinemaFILTER function is used during playback. Off: The CinemaFILTER function is not used during playback. 52