Onkyo TX-SR600 Owner Manual - Page 62
To record the input source signal you are currently, watching or listening
View all Onkyo TX-SR600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Recording a source (TX-SR600/600E) Input source buttons Notes: • You cannot record the surround effects. • Digital signals input to the DIGITAL INPUT (COAXIAL) and DIGITAL INPUT (OPTICAL) inputs will be only output to the DIGITAL OUTPUT (OPTICAL) output. • There are some restrictions on recording digital signals. When making digital recordings, consult the instruction manual that came with your digital recording equipment (e.g., MD recorder or DAT deck) to know what restrictions are imposed. • You cannot record the source connected to the 5.1-channel input jacks. • If you change the input source during recording, you will record the signals from the newly selected input source. • Digital input signals are only output to the digital outputs and analog input signals are only output to the analog outputs. There is no conversion from digital to analog or vice versa. When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well. To record the input source signal you are currently watching or listening to This method outputs to the audio and video outputs the currently selected input source signal. This method allows you to a signal while you are actually listening to or watching it. 1. Insert a media for recording into the recording component (cassette tape deck, video deck, or MD recorder). 2. Select the input source to record by pressing the corresponding input source button. 3. Start the output source component and start recording at the recording component as desired. 62