Onkyo TX-SR600 Owner Manual - Page 66

Using remote controller ON STANDBY MD MODE VOL MUTING MD operation buttons Numeric keys ENTER Controlling an Onkyo MD recorder The conneÇóctor of the Onkyo MD recorder must be connected to the TX-SR700/700E/600/600E (see page 29). 1. Press the MD MODE button. The MD MODE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo MD recorder. Operation buttons: ON: Turns on and off MD player (same as the STANDBY button on the remote controller) : Track down : Track up : Play : Stop : Skip backward : Skip forward REC: Record : Pause : Eject 1 to 9, 0, --/---: Numeric keys ENTER: Enters settings You may also use the following buttons: VOL : Adjusts volume at TX-SR700/700E/600/600E MUTING: Activates muting function at TX-SR700/700E/600/ 600E TV MODE TV VCR MODE VCR VOL MUTING VCR and TV MODE buttons No preset codes are programmed into the VCR and TV MODE buttons. Therefore you can use these buttons to program the remote controller signals of other devices. There are two methods. One method is selecting the name of a different brand from the table, entering the setting number listed, and calling up the pre-programming code (see page 67). The other method is sending the commands from the other brand's remote control directly into this remote controller (see page 70). When in the VCR and TV mode, you may use the following buttons: VOL : Adjusts volume at TX-SR700/700E/600/600E MUTING: Activates muting function at TX-SR700/700E/600/ 600E TV : Turns on and off the television (and switches to the TV mode) VCR : Turns on and off the VCR (and switches to the VCR mode) 66