Panasonic DMR-EA18K Dvd Recorder - Multi Language - Page 24

Advanced Playback Quick View (Play x1.3) RAM Allows you to increase the play speed slightly without distorting the audio. During playback (Press and hold.) - Press again to return to normal speed. Slow-motion Play RAM -R -R DL -RW(V) +R +R DL +RW DVD-V -RW(VR) While paused or - There are 5 slow-motion speeds. Each press increases the speed. - Press [q PLAY] to restart normal playback. Notes If continued for approx. 5 minutes, slow-motion play pauses automatically (except DVD-V ). Frame-by-Frame Viewing RAM -R -R DL -RW(V) +R +R DL +RW DVD-V -RW(VR) While paused - Each press shows the next or previous frame. - Press and hold to advance or reverse frame-by- frame in succession. - Press [q PLAY] to restart normal playback. Time Slip RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR) Use to skip in 1-minute or 10-minute increments. During playback e, r to select the time, then 24 RQT9048 - Each press of e or r advances the interval by 1 minute (press and hold for 10-minute intervals). CM Skip RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR) Skips 1-minute forward with each press. During playback Create Chapters RAM During playback Tips You can skip to the start of a chapter by pressing [u, i]. Tips Depending on the disc, some operations may not be possible. Changing Audio during Playback to select the audio. Available audio will differ based on disc type. See below. RAM -RW(VR) e.g.: RAM Stereo Mono L Mono R "Stereo" is selected. DVD-RAM Play Stereo RAM -RW(VR) When playing a multilingual broadcast, you can choose between Main Audio and SAP Audio. Main Audio SAP Audio DVD-V This allows you to change items like the audio channel number and the soundtrack language (➔ 38). Soundtrack 1 ENG Digital 3/2.1ch e.g., English is the selected language. Notes If you cannot change the audio type when you have used only an optical digital audio cable for connection, set "Dolby Digital" to "PCM" (➔ 46). Alternatively, you may connect to an amplifier or system component with an audio cable and change the input on the amplifier or system component to suit the connection (➔ 53).