Panasonic DMR-EA18K Dvd Recorder - Multi Language - Page 45
Still Mode paused video, Black Level Control, Dynamic Range Compression, Digital Audio Output
UPC - 037988256600
View all Panasonic DMR-EA18K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
e, r to select "Settings for Recording", then Input Level Adjusts the black level of the input signal. After selecting "Black Level Control" (➔ left, step 3). e, r to select "Input Level", then Setting Menus e, r to select "EP-Extended Play (6H)" or "EP-Extended Play (8H)", then [EP-Extended Play (6H)] You can record for 6 hours on an unused 4.7 GB disc. [EP-Extended Play (8H)] You can record for 8 hours on an unused 4.7 GB disc. Still Mode (paused video) Select the type of picture shown when you pause play (➔ 69, "Frame and field"). Perform step 1 of "Accessing the Setup Menu" (➔ 42). e, r to select "Video", then q e, r to select "Still Mode (paused video)", then e, r to select "Automatic", "Field" or "Frame", then [Field] Select if jittering occurs when "Automatic" is selected. [Frame] Select if you cannot see small text or fine patterns clearly when "Automatic" is selected. Black Level Control Select "Normal", "Lighter" or "Darker" to adjust the black level control to the desired setting for picture enhancement. Perform step 1 of "Accessing the Setup Menu" (➔ 42). e, r to select "Video", then q e, r to select "Black Level Control", then e, r to select "Lighter" or "Darker", then Output Level (Composite/S Video) Adjusts the black level of the output signal from the VIDEO OUT and S VIDEO OUT terminal. After selecting "Black Level Control" (➔ left, step 3). e, r to select "Output Level (Composite/S Video)", then e, r to select "Lighter " or "Darker", then Dynamic Range Compression DVD-V (Dolby Digital only) Change the dynamic range (➔ 69) for easier listening in low volume. Perform step 1 of "Accessing the Setup Menu" (➔ 42). e, r to select "Audio", then q e, r to select "Dynamic Range Compression", then e, r to select "On" or "Off", then Digital Audio Output Change the settings when you have connected equipment through the unit's DIGITAL AUDIO OUT terminal (➔ 53). Perform step 1 of "Accessing the Setup Menu" (➔ 42). e, r to select "Audio", then q e, r to select "Digital Audio Output", then Continued on next page. 45 RQT9048