Panasonic HC-X1 Advanced Operating Manual - Page 104
FOCUS MACRO], i.ZOOM], USB MODE], Register [USB MODE] to a USER button.
View all Panasonic HC-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
≥ It is not possible to adjust the shutter speed to a value slower than the limit imposed by the set frame rate. Example: When [REC FORMAT] is set to [FHD 1080/29.97p 50M], if you set the frame rate to 30 fps, the shutter speed cannot be adjusted to a value slower than 1/30. ≥ [BLACK FADE] and [WHITE FADE] are disabled. (l 88) ≥ Even if you press the recording start/stop button as soon as recording has started, it may take some time until the recording stops. ≥ The screen may momentarily black out when the frame rate is changed in Step 2. ≥ When using Variable Frame Rate (VFR) Mode with a low frame rate setting, this unit may not be able to keep up with changes in the image. In such a case, set the iris, focus and White Balance mode to manual settings. ≥ The maximum continuous recordable time for one scene in Variable Frame Rate Mode varies depending on the set frame rate. Recording stops when a certain time has elapsed since the start of the recording, and restarts automatically a few seconds later. j With undercrank recording: 10 hours j When recording with the same frame rate as the frame rate in [REC FORMAT]: 10 hours j With overcrank recording, the recordable time becomes shorter than 10 hours depending on the ratio between the frame rate for [REC FORMAT] and variable frame rate setting. Example: When [REC FORMAT] is set to [FHD 1080/29.97p 50M] Variable frame rate setting 2 fps 30 fps 60 fps ≥ "h" is an abbreviation for hour. Maximum continuous recordable time for one scene 10 h 5h [FOCUS MACRO] ≥ Register [FOCUS MACRO] to a USER button. (l 84) You can enable/disable Focus Macro. ≥ is displayed on the screen when [ON] is selected. [i.ZOOM] ≥ Register [i.ZOOM] to a USER button. (l 84) You can enable/disable i.Zoom. (l 51) [USB MODE] ≥ Register [USB MODE] to a USER button. (l 84) Enable/disable connection to the USB ports of this unit. ≥ If you switch the setting from on to off while a USB port is in use, a message may be displayed, instructing you to unmount the USB cable safely. Select [YES] to terminate the connection safely. - 104 -