Panasonic HC-X1 Advanced Operating Manual - Page 200
Initial Set], Number Reset], Software Info], Language], Touch [software Info].
View all Panasonic HC-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
[INITIAL SET] The menu settings or [FILE SELECT] are reset to the default. (l 153) [ALL]: This is for initializing all menus.* [SCENE]: This is for initializing the setting of each scene number of [FILE SELECT]. [NETWORK]: This is for initializing the [NETWORK SETUP] menu settings. [NO]: This is for not performing initialization. * Settings for [CLOCK SET], [TIME ZONE] and [SYSTEM FREQ] will not be changed. ≥ Returning all settings to the default is not possible during Freeze Frame. (l 91) [NUMBER RESET] Set the file number of the next MOV/MP4 and still picture to be saved to 0001. ≥ Folder number is updated and file number will start from 0001. (l 136) ≥ To reset the folder number, format the SD card, and then perform [NUMBER RESET]. [SOFTWARE INFO] You can view the software information (License) on a PC connected to this unit with a USB 3.0 cable. ≥ Set [USB MODE SELECT] to [DEVICE]. (l 199) ≥ Set [USB MODE] to [ON]. (l 199) 1 Touch [SOFTWARE INFO]. 2 Connect this unit to a PC. (l 135) ≥ A message will be displayed when the connection is complete. On the PC, confirm [LICENSE.TXT]. ≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on. [LANGUAGE] You can select the language on the screen display and the menu screen. [English]/[Français]/[Español]/[Português] - 200 -