Panasonic HC-X1 Advanced Operating Manual - Page 180

∫ Relay recording This is simple Relay Recording. It is possible to continuously record on the SD card in the other card slot even when the available capacity of the SD card runs out during the recording.           1 Slot 1 2 Slot 2 3 Recording is started 4 Recording is paused A Recording B The card slot used for recording is switched automatically. C Replace the SD card with a recordable one. ≥ RELAY is displayed beside the display of the SD card selected as the recording destination of motion pictures in [MEDIA SELECT] (l 43). When the recording media is switched and Relay Recording starts, RELAY will disappear from the location and instead be displayed beside the other SD card display. ≥ Even after switching of the recording media, you can replace the SD card that ran out of space with a new one and record the motion picture onto three or more SD cards. Since it may take a while for this unit to recognize a new SD card, replace the SD card that ran out of space when the SD card currently being used as a destination still has sufficient remaining recordable time. ≥ The maximum recording time for Relay Recording is 10 hours. ≥ When the recording time of Relay Recording reaches 10 hours, the recording will stop temporarily. It will restart automatically a few seconds later. ∫ Simultaneous recording Same motion picture can be recorded on two SD cards.       1 Slot 1 2 Slot 2 3 Recording is started 4 Recording is paused A Recording ≥ SIMUL is displayed beside the display of the SD card selected as the recording destination of motion pictures in [MEDIA SELECT] (l 43). ≥ If you set the recording destination of motion pictures to [SD CARD 1] in [MEDIA SELECT], they will also be recorded to [SD CARD 2] simultaneously. ≥ We recommend that you perform simultaneous recording using SD cards of the same Speed Class rating and capacity. - 180 -