Panasonic HC-X1 Advanced Operating Manual - Page 71
Gain adjustment, Press the GAIN button to switch to [LOW GAIN], [MID GAIN], or [HIGH GAIN].
View all Panasonic HC-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Gain adjustment ≥ Use the jog dial to change the settings. 0dB 1 Jog dial 2 GAIN button GAIN A Gain value ≥ In Auto Gain Mode, "AGC" is displayed; in Manual Gain Mode, the gain value is displayed in dB. B [GAIN] ≥ Switch to Manual Mode. (l 46) 1 Press the GAIN button to switch to [LOW GAIN], [MID GAIN], or [HIGH GAIN]. ≥ The setting changes each time you press the button. [LOW GAIN] # [MID GAIN] # [HIGH GAIN] ≥ It is possible to register gain values to [LOW GAIN], [MID GAIN], and [HIGH GAIN] and switch between these values. (l 170, 171) ≥ It is also possible to switch to the desired gain value by pressing the USER button to which [LOW GAIN], [MID GAIN] or [HIGH GAIN] is registered. (l 107) 2 Push the jog dial. 3 Adjust the gain by rotating the jog dial. Gain value: 0 dB to 24 dB ≥ Value closer to 0 dB darken the image. ≥ Value closer to 24 dB brighten the image. ≥ When [EXTENDED SENSITIVITY] is set to [ON], you can set a value between -3 dB and 24 dB. (l 167) ≥ The selected gain value is not maintained if any of the following operations is performed: j Pressing the GAIN button j Switching to Auto Gain Mode j Switching to Infrared Recording Mode (l 94, 185) ≥ Auto Gain Mode is activated when one of the following operations is performed: j Setting [AGC] to [ON] and switching to Auto Mode (l 46) j Setting [LOW GAIN], [MID GAIN] or [HIGH GAIN] to [AUTO] and then pressing the GAIN button to switch to the applicable gain setting. - 71 -