Panasonic HC-X1 Advanced Operating Manual - Page 214
Warning Indications
View all Panasonic HC-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Display Warning Indications When an error is detected immediately after this unit is turned on or while it is being operated, the status indicator, on-screen displays and the AG ROP application screen (during AG ROP connection) inform you of the error. System error The battery is depleted (Low input voltage) The card is full Status indicator It flashes once per second. On-screen display s AG ROP application screen [ WARNING ] flashes four times per second. Meaning of the warning A reference signal error or communication error has occurred. Recording/playback The operation stops. Solution Turn off and on this unit. If the warning persists, consult your dealer. Status indicator It flashes once per second. On-screen display The message [LOW BATTERY.] is displayed. AG ROP application screen [ WARNING ] lights up. Meaning of the warning The battery is depleted. Recording/playback The operation stops. This unit turns off automatically. Solution Charge or replace the battery. Connect the AC adaptor to cancel the warning. Status indicator s On-screen display The remaining recordable time flashes red when it reaches [R 0h00m]. AG ROP application screen [ WARNING ] lights up until you perform some operation after the recording. Meaning of the warning The SD card capacity is full. Recording/playback The recording stops. Solution Delete unnecessary scenes, or use a new SD card. - 214 -