Panasonic HC-X1 Advanced Operating Manual - Page 154

≥ This function's default setting is [F1:]. ≥ It is possible to switch the scene number by touching F1: to F6: while displaying the operation icons. (l 111) ≥ You can rename the titles for scene numbers (FLUO, etc.) in [NAME EDIT]. ≥ It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (l 200) [NAME EDIT] You can rename the title of the scene number selected in [FILE SELECT]. 1 Touch [NAME EDIT]. 2 Enter the desired title. ≥ For information on how to enter characters, refer to page 146. ≥ Up to 6 alphanumeric characters can be entered. ≥ Touch [Return] to return to the previous screen. (The title will not be renamed to the one that has been entered.) 3 Touch [Enter]. ≥ The title will be updated. [LOAD/SAVE] You can save the scene file settings to the SD card or load them from the SD card to this unit. (l 100) [LOAD]/[SAVE] [SYNCHRO SCAN] Sets the initial Synchro Scan setting. ≥ Depending on the size and frame rate in [REC FORMAT], the setting range varies. (l 163) 1 Touch [SYNCHRO SCAN]. 2 Touch / to adjust settings. 3 Touch [EXIT] to complete the setting. ∫ Note on the [SYNCHRO SCAN] setting A separate [SYNCHRO SCAN] setting is maintained for each size and frame rate in [REC FORMAT]. ≥ Default settings are indicated with underlined text. Frame rates [SYNCHRO SCAN] setting 59.94p/59.94i 1/60.0 to 1/249.7 29.97p 1/30.0 to 1/60.0 to 1/249.7 23.98p 1/24.0 to 1/48.0 to 1/249.6 24.00p 1/24.0 to 1/48.0 to 1/249.9 50.00p/50.00i 1/50.0 to 1/250.0 25.00p 1/25.0 to 1/50.0 to 1/250.0 - 154 -