Panasonic HC-X1 Advanced Operating Manual - Page 152

Operations during AG ROP application connection ∫ Operations with this unit during connection ≥ The following buttons are disabled: j SHUTTER button j GAIN button j WHITE BAL button j MENU button (The applicable USER button is also disabled, making it impossible to operate the menu.) j BARS button j THUMBNAIL button ≥ You can change the [ZOOM/FOCUS] setting in the [SW SETUP] menu to switch between operating this unit and operating it with the AG ROP application. Since selecting [IP REMOTE] will disable the following switches and buttons, to operate them with this unit, select [CAMERA]: j Focus ring j Zoom lever j Sub zoom lever j PUSH AUTO button, USER button to which [PUSH AUTO] is registered. j FOCUS A/M/¶ switch j Switching to Auto Focus Mode with the AUTO/MANU switch (l 46) ≥ You can press the IRIS button to switch between operating the iris ring of this unit and operating it with the AG ROP application. The iris ring of this unit cannot be used when you operate this unit with the AG ROP application. ∫ Recording and playback operations during connection You can perform operations with either this unit or the AG ROP application while connected to the AG ROP application. ∫ Limitations on this unit during connection ≥ The following functions are disabled during AG ROP application connection: j Magnifying the Focus Assist display (l 58) j Focus Transition (l 63) j USB Mode (USER button) (l 87) j Area Mode (l 92) ≥ Settings that are changed remotely with the AG ROP application are applied to the corresponding settings of this unit. ≥ When WARNING is flashing on the AG ROP application screen, remote control operations may not be performed due to an error on this unit. Check this unit. For details, refer to "Warning Indications" on page 214. - 152 -