Panasonic HC-X1 Advanced Operating Manual - Page 199
ALERT SOUND], ECONOMY BATT], SYSTEM FREQ], USB MODE], USB MODE SELECT], Beeps for 4 times, Volume low
![]() |
View all Panasonic HC-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
[ALERT SOUND] Touch screen operation, start and stop of recording can be confirmed with this sound. When [OFF] is selected, the sound is not output at the start/end of recording, etc. [OFF]/ (Volume low)/ (Volume high) 2 Beeps for 4 times When an error occurs. Check the message displayed on the screen. (l 208) [ECONOMY (BATT)] When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life. [ON]/[OFF] ≥ This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following cases: j PRE-REC is used (l 97, 185) j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 135) [ECONOMY (AC)] When connected to AC adaptor about 15 minutes have passed without any operation, this unit automatically turns off. [ON]/[OFF] ≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following cases: j PRE-REC is used (l 97, 185) j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 135) [SYSTEM FREQ] Set the system frequency of this unit. (l 162) [USB MODE] Enable/disable connections to the USB terminals of this unit. (l 104) [ON]/[OFF] [USB MODE SELECT] The unit's USB terminal to which a USB Cable will be connected can be switched. Switch the terminal according to the shape of the USB Cable's plug you intend to connect to the unit. [HOST]: [DEVICE]: For connecting to the USB HOST terminal (Type A) of the unit For connecting to the USB DEVICE terminal (Type Micro-B) of the unit - 199 -
![](/manual_guide/products/panasonic-hcx1-advanced-operating-manual-5b3ba52/199.png)