Panasonic KX-MB2061 Operating Instructions - Page 18
Handset unit
View all Panasonic KX-MB2061 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1. Introduction and Installation 1.9.1 Manual input tray You can use the manual input tray for printing with the computer and for copying. It can hold one page at a time. When printing or copying multiple pages, add the next page after the first page has been fed into the base unit. R Please refer to page 138 for information on recording paper. R The unit is set for printing letter-size plain paper by default. - To use other paper sizes, change the recording paper size setting (feature #381 on page 81). - To use thin paper, change the recording paper type setting (feature #384 on page 81). 1 Adjust the width of the guides (A) to the size of the recording paper. 2 Insert the paper, print-side down (B) until the base unit grasps the paper and a single beep is heard. B 1.10 Handset unit Important: R Before installing or removing the handset unit, be sure to turn the power switch OFF. 1 Connect the handset cord (A). A 2 Connect the handset connector (B). R Remove the seal from the handset unit connection jack if attached. B A Note: R To print from the manual input tray; - when printing with the computer, select #2 for the printer properties. - when making a copy, set the copy input tray setting to "#2" beforehand (feature #460 on page 90). If these settings are not changed, when printing or copying multiple pages, the 1st page will be printed from the manual input tray, but the rest of the pages will be printed from the paper input tray. R If the paper is not inserted correctly, re-adjust the paper, or the paper may jam. 18 For assistance, please visit http://www.panasonic.com/help