Home » Panasonic Manuals » Multifunction Devices » Panasonic KX-MB2061 » Manual Viewer

Panasonic KX-MB2061 Operating Instructions - Page 57

Sending a fax manually

View all Panasonic KX-MB2061 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

8. Fax 8.1 Sending a fax manually To select the resolution 1. Press MResolutionN repeatedly. 8. . Fax 8.1.1 Using the scanner glass - "STANDARD": For normal-sized characters. - "FINE": For small-sized characters. By using the scanner glass, you can send a page from booklets or small size paper. - "SUPER FINE": For very small-sized characters. - "PHOTO": For photographs, shaded drawings, etc. 2. MSetN R Using the "FINE", "SUPER FINE" and "PHOTO" settings will increase transmission time. To select the contrast Adjust this setting depending on the darkness or lightness of the document. 5 levels (low to high) are available. Press MContrastN repeatedly. A MSetN Note: R You can save the previous contrast setting (feature #462 on page 81). MFaxN MRedialN MSetN MContrastN MResolutionN MStartN 1 If the MFaxN light is OFF, turn it ON by pressing MFaxN. 2 Set the original (page 25). 3 If necessary, change the resolution and contrast according to the type of document. R To select the resolution, see page 57. R To select the contrast, see page 57. 4 Dial the fax number. 5 Press MStartN to scan the document into memory. Wait until "SCAN:PRESS SET" "SEND:PRESS START" is displayed. R To send a single page, go to step 7. R To send multiple pages, go to the next step. 6 Place the next page on the scanner glass. A MSetN R To send more pages, repeat this step. 7 MStartN Note: R To stop sending, see page 108. R You can change the default operation mode (feature #463 on page 81) and the timer before returning to the default operation mode (feature #464 on page 81). To redial the last number MRedialN R If the line is busy, the unit will automatically redial the number 1 time. Note: R To stop sending, see page 108. Reserving the fax transmission (Dual Access) You can reserve a fax transmission even when the unit is just receiving a fax or sending a fax from memory. - Up to 3 reservations when sending - Up to 4 reservations when receiving 1. Set the original during fax reception or fax memory transmission. 2. Enter the fax number using the dial keypad, one-touch dial or phonebook. 3. When using the scanner glass, press MStartN. The unit will scan 1 page. Place the next document on the scanner glass and press MSetN. Repeat this until all the documents are scanned, then press MStartN. When using the automatic document feeder, press MStartN. R If the document exceeds the memory capacity, the reservation for that document will be canceled. You must send the entire document manually. Printing a confirmation report A confirmation report provides you with a printed record of transmission results. To print the confirmation reports, make sure that feature #401 is activated (page 83). For an explanation of the messages, see page 109. Printing a journal report A journal report provides you with a printed record of the 30 most recent faxes. To print it manually, see page 137. To print it automatically after every 30 new fax transmissions and receptions, make sure feature 57

Section	Page
Important Information	3
Important Information	3
For your safety	3
For best performance	3
Moving the base unit	4
Illegal copies	4
Table of Contents	5
Introduction and Installation	7
Accessories	7
1.1 Supplied accessories	7
1.2 Accessory information	7
Finding the Controls	8
1.3 Button descriptions of the base unit	8
1.4 Button descriptions of the cordless handset (KX-MB2060 optional)	9
1.5 Display descriptions of the cordless handset (KX-MB2060 optional)	10
1.6 Overview	10
1.6.1 Base unit front view	10
1.6.2 Base unit rear view	11
1.6.3 Cordless handset (KX-MB2060 optional)	11
Installation	12
1.7 Toner cartridge and drum cartridge	12
1.8 Output tray	15
1.9 Recording paper	16
1.9.1 Manual input tray	18
Telephone	18
1.10 Handset unit	18
1.11 Battery installation / replacement (KX-MB2060 optional)	19
1.12 Belt clip (KX-MB2060 optional)	20
Preparation	21
Connections and Setup	21
2.1 Connections	21
2.1.1 Base unit	21
2.1.2 Charger unit (KX-MB2060 optional)	21
2.2 Battery charge (KX-MB2060 optional)	22
2.3 Intelligent eco mode (KX-MB2060 optional)	23
2.4 Turning the power ON	23
2.5 Dialing mode for the base unit, and cordless handset (KX-MB2060 optional)	24
2.6 Selecting the operation mode (Scan/Copy/Fax)	24
Document Requirements	25
2.7 Setting the original	25
2.7.1 Using the scanner glass	25
2.7.2 Using the automatic document feeder	25
Help	26
2.8 Help function	26
Volume	27
2.9 Adjusting the volume	27
2.9.1 Base unit	27
2.9.2 Cordless handset (KX-MB2060 optional)	27
Initial Programming	28
2.10 Date and time	28
2.10.1 With the base unit	28
2.10.2 With the cordless handset (KX-MB2060 optional)	28
2.11 Your logo	29
2.12 Your fax number	29
2.13 Configuring the unit to access the LAN	30
2.13.1 Setting up automatically with a DHCP server	30
2.13.2 Setting up manually	30
2.13.3 Setting the computer for PC fax reception	30
2.13.4 Setting the computer for PC TAM reception	30
2.14 Installing Multi-Function Station	31
2.14.1 Required computer environment	31
2.14.2 Installing Multi-Function Station on a computer	32
2.15 Starting Multi-Function Station	33
Printer	35
Printer	35
3.1 Printing from Windows applications	35
3.2 Easy Print Utility	36
3.2.1 Ecology printing features	36
Scanner	37
Scanner	37
4.1 Scanning from the base unit (Push Scan)	37
4.1.1 Scan to Multi-Function Viewer	37
4.1.2 Scan to save as a file	37
4.1.3 Scan to Email	38
4.1.4 Scan to OCR	38
4.1.5 Scan to email address (LAN connection only)	38
4.1.6 Scan to FTP server (LAN connection only)	39
4.1.7 Scan to SMB folder (LAN connection only)	40
4.2 Scanning from a computer (Pull Scan)	40
4.2.1 Using Multi-Function scan application	40
4.2.2 Using Multi-Function Viewer	40
4.2.3 Using other applications	41
Copier	42
Copy	42
5.1 Making a copy	42
5.1.1 Using the scanner glass	42
5.1.2 Using the automatic document feeder	43
5.2 More copying features	43
5.2.1 Zoom copy (enlargement / reduction)	43
5.2.2 Collate copy	44
5.2.3 Quick ID copy feature / Image repeat feature (Scanner glass only)	44
5.2.4 Poster feature (Scanner glass only)	46
5.2.5 N in 1 feature	46
5.2.6 Edge feature	47
5.2.7 Margin feature	47
5.2.8 Copy reservation	47
Telephone	49
Making and Answering Calls	49
6.1 Making phone calls	49
6.1.1 With the base unit	49
6.1.2 With the cordless handset (KX-MB2060 optional)	49
6.2 Answering phone calls	50
6.2.1 With the base unit	50
6.2.2 With the cordless handset (KX-MB2060 optional)	50
6.3 Silent mode	50
6.3.1 With the base unit	50
6.3.2 With the cordless handset (KX-MB2060 optional)	51
Automatic Dialing	51
6.4 One-touch dial feature and shared phonebook	51
6.4.1 Storing one-touch dial item (Base unit only)	51
6.4.2 Storing phonebook items	52
6.4.3 Groups (Cordless handset only, KX-MB2060 optional)	52
6.4.4 Editing a stored item	52
6.4.5 Erasing a stored item	52
6.4.6 Making a phone call using one-touch dial feature (Base unit only)	53
6.4.7 Making a phone call using the phonebook	53
6.5 Chain dial (Cordless handset only, KX-MB2060 optional)	53
Caller ID	54
Caller ID	54
7.1 Caller ID	54
7.1.1 How Caller ID is displayed	54
7.1.2 Group ringer tone for phonebook (Cordless handset only, KX-MB2060 optional)	54
7.2 Viewing and calling back using caller information	55
7.2.1 With the base unit	55
7.2.2 With the cordless handset (KX-MB2060 optional)	55
7.2.3 Symbols and operations for caller information	55
7.3 Erasing caller information	55
7.3.1 With the base unit	55
7.3.2 With the cordless handset (KX-MB2060 optional)	55
7.4 Storing caller information	56
7.4.1 Into the one-touch dial feature and phonebook (Base unit)	56
7.4.2 Into the phonebook (Cordless handset, KX-MB2060 optional)	56
Fax	57
Sending Faxes	57
8.1 Sending a fax manually	57
8.1.1 Using the scanner glass	57
8.1.2 Using the automatic document feeder	58
8.2 Sending a fax using one-touch dial feature and phonebook	58
8.2.1 Using the scanner glass	58
8.2.2 Using the automatic document feeder	58
8.3 Broadcast transmission	59
8.3.1 Programming items into the broadcast memory	59
8.3.2 Adding a new item into the broadcast memory	60
8.3.3 Erasing a stored item from the broadcast memory	60
8.3.4 Sending the same document to pre-programmed parties	60
8.4 Sending an electronic document as a fax message from your computer	61
Receiving Faxes	61
8.5 Selecting the way to use your unit	61
8.5.1 Use as a telephone answering machine and/or fax (TAM/FAX mode)	61
8.5.2 Use only as a fax (FAX ONLY mode)	62
8.5.3 Use mostly as a telephone (TEL mode)	62
8.6 Receiving a fax automatically: Auto answer ON	62
8.6.1 Activating TAM/FAX mode (Telephone Answering Machine/Fax mode)	62
8.6.2 Activating FAX ONLY mode	63
8.7 Receiving a fax manually: Auto answer OFF	64
8.7.1 Activating TEL mode	64
8.8 Junk fax prohibitor (preventing fax reception from undesired callers)	65
8.8.1 Activating the junk fax prohibitor	65
8.8.2 Storing undesired callers	65
8.9 Receiving a fax on your computer	65
8.10 Web fax preview (LAN connection only)	66
8.10.1 Activating the fax preview mode	66
8.10.2 Programming the web fax preview access code	66
8.10.3 Displaying a received fax document on the web browser	66
Distinctive Ring	68
Distinctive Ring	68
9.1 Distinctive Ring service	68
9.2 Using two or more phone numbers on a single telephone line	68
9.2.1 Activating the Distinctive Ring feature	68
9.3 Using three or more phone numbers on a single telephone line	68
9.4 Programming the ring pattern assigned for fax	68
Answering Machine	69
Recording	69
10.1 Recording your greeting message	69
10.1.1 Erasing your recorded greeting message	69
10.2 Leaving a voice message for others or yourself (Memo recording)	69
10.3 Recording a telephone conversation	69
Listening	70
10.4 Listening to voice messages	70
10.4.1 To play back messages	70
10.4.2 Useful features during playback	70
10.4.3 Erasing voice messages	70
Voice Transfer	71
10.5 Transferring a specific voice message to email address (voice to email address) (LAN connection only)	71
10.6 Transferring a specific voice message to a computer (voice to PC)	71
Remote Operation	72
10.7 Receiving all incoming voice messages on your computer	72
10.7.1 Listening to voice messages	72
10.8 Listening to voice messages via a web browser (web voice playback) (LAN connection only)	73
10.8.1 Activating the web voice playback mode	73
10.8.2 Programming the web voice playback code	73
10.8.3 Listening to voice messages	73
10.9 Operating from a remote location	73
10.9.1 Summary of remote operation	73
10.9.2 Remote operation using remote commands	74
10.10 Using the answering machine with the cordless handset (KX-MB2060 optional)	74
10.10.1 Recording your greeting message	74
10.10.2 Recording a telephone conversation	75
10.10.3 Listening to voice messages	75
10.10.4 Erasing voice messages	75
10.10.5 Direct command operation	75
10.10.6 Programming for answering machine	76
Programmable Features	77
Features Summary	77
11.1 Base unit programming	77
11.1.1 Basic features	78
11.1.2 Fax features	83
11.1.3 TAM features	88
11.1.4 Copy features	90
11.1.5 PC print features	91
11.1.6 Scan features	92
11.1.7 LAN features	94
11.1.8 Network features (LAN connection only)	97
11.2 Cordless handset programming (KX-MB2060 optional)	99
11.2.1 Cordless handset features	99
11.2.2 Cordless handset setup	103
Multi-unit Operation (KX-MB2060 optional)	104
Additional Units	104
12.1 Operating additional units	104
12.1.1 Additional cordless handsets	104
12.2 Registering a cordless handset to a base unit	104
12.2.1 Deregistering a cordless handset	104
Other Features	104
12.3 Intercom	104
12.3.1 Making intercom calls	104
12.3.2 Answering intercom calls	105
12.4 Transferring a call/conference	105
12.4.1 To the base unit or another cordless handset (using the cordless handset)	105
12.4.2 To a cordless handset (using the base unit)	105
Useful Information	106
Useful Information	106
13.1 Character entry	106
13.2 Status of the base unit	107
13.2.1 Using Remote Control	107
13.2.2 Using Device Monitor	107
13.2.3 Using the web browser (LAN connection only)	107
13.3 Canceling the operations	108
Help	109
Reports and Displays	109
14.1 Report messages	109
14.2 Display messages	110
14.2.1 Base unit	110
14.2.2 Cordless handset (KX-MB2060 optional)	112
Troubleshooting	114
14.3 When a function does not work	114
14.3.1 General	114
14.3.2 Printing problems	115
14.3.3 Scanner	116
14.3.4 Copier	116
14.3.5 Fax	117
14.3.6 Caller ID	120
14.3.7 Cordless handset (KX-MB2060 optional)	120
14.3.8 Network (LAN connection only)	122
14.3.9 Answering machine	123
14.3.10 If a power failure occurs	123
14.3.11 Firewall setting tool for Microsoft Windows XP Service Pack 2 or later/Windows Vista/Windows 7 users (LAN connection only)	124
14.3.12 Notice for KX-MB200/KX-MB700/KX-FLB880 series users	124
Paper Jams	126
Jams	126
15.1 Recording paper jam	126
15.1.1 When the recording paper has jammed inside of the unit	126
15.1.2 When the recording paper is not fed into the unit properly	130
15.1.3 When the recording paper in the manual input tray is not fed into the unit properly	130
15.2 Document jams (Automatic document feeder)	131
Cleaning	133
Cleaning	133
16.1 Cleaning the white plates and glass	133
16.1.1 White plates and scanner glass	133
16.1.2 Lower glass	134
16.2 Cleaning the document feeder rollers	136
General Information	137
Printed Reports	137
17.1 Reference lists and reports (Base unit only)	137
Specifications	137
17.2 Specifications	137
17.2.1 Base unit	137
17.2.2 Cordless handset (KX-MB2060 optional)	138
17.2.3 Charger unit (KX-MB2060 optional)	139
Copyrights	141
17.3 Information of copyrights and licenses	141
Index	153

Match case Limit results 1 per page

8.1 Sending a fax manually

8.1.1 Using the scanner glass

By using the scanner glass, you can send a page from

booklets or small size paper.

Resolution

Contrast

Redial

Fax

Start

Set

If the

Fax

light is OFF, turn it ON by pressing

Fax

Set the original (page 25).

If necessary, change the resolution and contrast

according to the type of document.

To select the resolution, see page 57.

To select the contrast, see page 57.

Dial the fax number.

Press

Start

to scan the document into memory.

Wait until

“

SCAN:PRESS SET

”

“

SEND:PRESS

START

”

is displayed.

To send a single page, go to step 7.

To send multiple pages, go to the next step.

Place the next page on the scanner glass.

Set

To send more pages, repeat this step.

Start

Note:

To stop sending, see page 108.

You can change the default operation mode (feature

#463 on page 81) and the timer before returning to

the default operation mode (feature #464 on

page 81).

To select the resolution

Press

Resolution

repeatedly.

–

“

STANDARD

”

: For normal-sized characters.

–

“

FINE

”

: For small-sized characters.

–

“

SUPER FINE

”

: For very small-sized characters.

–

“

PHOTO

”

: For photographs, shaded drawings,

etc.

Set

Using the

“

FINE

”

“

SUPER FINE

”

and

“

PHOTO

”

settings will increase transmission time.

To select the contrast

Adjust this setting depending on the darkness or

lightness of the document. 5 levels (low to high) are

available.

Press

Contrast

repeatedly.

Set

Note:

You can save the previous contrast setting (feature

#462 on page 81).

To redial the last number

Redial

If the line is busy, the unit will automatically redial the

number 1 time.

Note:

To stop sending, see page 108.

Reserving the fax transmission (Dual Access)

You can reserve a fax transmission even when the unit

is just receiving a fax or sending a fax from memory.

–

Up to 3 reservations when sending

–

Up to 4 reservations when receiving

Set the original during fax reception or fax memory

transmission.

Enter the fax number using the dial keypad,

one-touch dial or phonebook.

When using the scanner glass,

press

Start

. The

unit will scan 1 page. Place the next document on the

scanner glass and press

Set

. Repeat this until all

the documents are scanned, then press

Start

When using the automatic document feeder,

press

Start

If the document exceeds the memory capacity, the

reservation for that document will be canceled. You

must send the entire document manually.

Printing a confirmation report

A confirmation report provides you with a printed record

of transmission results. To print the confirmation reports,

make sure that feature #401 is activated (page 83). For

an explanation of the messages, see page 109.

Printing a journal report

A journal report provides you with a printed record of the

30 most recent faxes. To print it manually, see

page 137. To print it automatically after every 30 new

fax transmissions and receptions, make sure feature

8. Fax