Philips HDRW720 User manual - Page 15

ENGLISH Introduction Super Video CD Component Video cable (Cinch cable with red/blue/green connectors) Audio cable (Cinch cable with red/white connectors) IR blaster CD-R (CD-Recordable) with Audio/MP3 content CD-RW (CD-Rewritable) with Audio/MP3 content Regional code DVDs must be marked 'ALL' for all regions or '1' for region 1 to work in this machine. If the DVD is marked with a different region, it cannot be played in this DVD recorder. The number within the globe represents the region of the world. Region 1 covers: United States of America, Canada, North America, Bermuda, U.S. Virgin Islands and smaller regions around Australia. Technical data You will find more technical data on the last cover page. Voltage: 110-130V/60Hz Power consumption: 27W Power consumption (standby): less than 3W (clock display off) Measurements in cm (W/H/D): 43.5/7.6/33.5 (Disc tray closed), 47.2 cm (disc tray open) Weight without packaging approx.: 4.0kg Power outage/no power: Channel and timer information remain saved for approx. 1 year, the time is saved for approx. 12 hours. If there is power outage during a recording on the HDD (time shift buffer) at most the last 5 minutes before the power outage will be lost. Operating position: maximum 10 degree inclination in all directions Ambient temperature: 15 °C - 35 °C Humidity: 25% - 75% Important ACaution! Visible and invisible laser radiation. If the cover is open, do not look at the beam. Because of the risk of eye injuries, only qualified service engineers should open the device and carry out maintenance or repair work. ALASER Typ: Semiconductor lasers InGaAlP (DVD), AlGaAs(CD) Wavelength: 660nm (DVD), 780nm (CD) Output power (outside the lens): 20mW (DVD+RW write), 0.8mW (DVD read), 0.3mW (CD read). Beam divergence: 82 degrees (DVD), 54 degrees (CD) ADanger. High voltage! Do not open. Do not insert objects into the ventilation slots and fan openings! You run the risk of getting an electric shock. AThe device does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. AThere are some components in the DVD recorder that keep running as long as the recorder is connected to AC-outlet. To switch off the DVD recorder completely, you must unplug it from the AC-outlet. AIf you disconnect the DVD recorder from the AC-outlet, make sure to take the plug out of the wall jack and not just remove the connector from the 4MAINS jack at the back of the unit. Children playing near the device could suffer injuries at the free end of the cable. AMake sure that air can circulate freely through the ventilation slots on the side and the fan opening at the back of the device to avoid overheating. The device should be placed on a firm surface. ADo not insert any objects into the openings or ventilation slots of the device. Accessories Operating instructions Guarantee booklet Remote control and batteries Antenna cable AC-outlet (mains) cable C These operating instructions have been printed on non-polluting paper. C Please dispose of old batteries safely. C Please take the packaging to your local recycling centre. 8