Philips HDRW720 User manual - Page 54
General notes on playback, Switch over to the actual TV channel during playback, Inserting a disc
View all Philips HDRW720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Playback from a disc General notes on playback With this DVD recorder you can play back the following systems: •) DVD Video •) (Super)Video CD Disc •) DVD+RW Disc •) DVD+R Disc •) DVD-RW (video mode, finalized) •) DVD-R •) CD-R •) CD-RW •) Audio CD •) MP3-CD You can operate the video recorder using the remote control or the buttons on the front of the DVD recorder. a The display will read 'PIN' b The child lock has been activated for the inserted disc. Read the sections on 'Child lock' and 'Releasing a disc' in the chapter on 'Access control (child lock). a The menu on the screen is showing an 'X' b Some DVD discs can be manufactured so that certain steps are required before the disc can be played, or so that only limited operation is possible during playback. When an 'X' appears on the screen the selected feature is not possible. a The screen is showing regional code information b Since DVD films are not normally released in all parts of the world at the same time, all DVD players have a specific regional code. Discs can be given a regional code. If the regional codes differ between the player and the disc, playback is not possible. b The regional code is shown on the label on the back of the machine. b The regional code does not apply to recordable DVDs. a I can see the message 'EMPTYDISC' b The disc does not contain any recordings. a 'DISC ERROR' will appear on the display b Recording could not be completed correctly because of a disc error. Check the disc and clean it if necessary. a A dialog box appears asking you whether you want to delete the contents or eject the disc b The disc inserted is a DVD+RW but its contents are not DVD video-compatible (e.g. a data disc). Recordings on this disc can only be made if the entire disc is first deleted with the REC/OTR n button. Switch over to the actual TV channel during playback As soon as you turn on the DVD recorder, the currently selected TV channel on the DVD-Recorder is recorded in a temporary storage (Time shift Buffer). Recordings in the time shift buffer will be automatically deleted e.g. after 3 hours if the period of the time shift buffer is set to 3 hours (factory setting). You can play back a disc, while the current TV show is still being recorded. 1 To interrupt playback from a disc, press TUNER P You will see the TV-show from the selected TV channel on the DVD-recorder O To continue playback, from the disc press DISC MENU . Inserting a disc 1 Press the OPEN/CLOSE J button on the front. OPENING P01 P The disc tray will open. While the disc tray is opening, the display shows 'OPENING' and then 'TRAY OPEN' when the tray is fully open. 2 Carefully place the disc in the tray with the label facing up and press PLAY G or OPEN/CLOSE J . P 'CLOSING' and then 'READING' will appear in the display. The information on the disc will be read. How do I insert a double-sided DVD? Double-sided discs do not have labelling over the whole surface. The labelling for each side is in the centre of the disc. To play a side its label must be facing up. Opening/closing the tray using the remote control You can open and close the disc tray using the remote control. Press and hold the STOP h button on the remote control until the dialog box shows 'OPENING' or 'CLOSING'. 47