Philips TSU6000 User manual - Page 26
Learning Control Panel Buttons
View all Philips TSU6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Getting the Maximum out of it Learning Control Panel Buttons 1 Navigate to the control panel button you want to program. 2 Switch to Learn mode via the Remote Control icon . Additional empty buttons and previously deleted buttons appear. 3 Point the device's original remote control to the Remote Control's learning eye as shown above. 4 Tap the Remote Control button you want to program. The button starts flashing 5 Press and hold the corresponding button on your device's original remote control. If the Remote Control has learned the command successfully, OK flashes on the Remote Control icon. If the Remote Control has not learned the command successfully, you hear a short buzz and FAIL appears on the Remote Control icon. 6 Program all other buttons you want and relabel them if necessary (see p. 29). 7 Return to Use mode via the Remote Control icon. User Guide 26