Philips TSU6000 User manual - Page 50
How do I calibrate the touch screen?, Why does a device respond to some RF signals and not to others
View all Philips TSU6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
FAQ 3 Tap the Revert button. 4 Tap Revert to confirm the action. How do I calibrate the touch screen? The Remote Control is calibrated when it leaves the factory. It is possible you have to calibrate the touch screen: • when the touch screen buttons do not respond properly. Complete instructions 1 to 6 in "Calibrating the touch screen" described below. • when the Remote Control displays a message to calibrate the touch screen. Complete instructions 4 and 5 in "Calibrating the touch screen" described below. Calibrating the touch screen 1 Touch and hold the Remote Control icon The Remote Control switches to Setup mode. for three seconds. 2 Scroll to the second setup panel. 3 Tap the Calibrate button . The first instruction "Touch TOP LEFT corner" appears. 4 Tap as close as possible in the upper left corner using a blunt tip of a pencil. The second instruction "Touch BUTTOM RIGHT corner" appears. 5 Tap as close as possible in the upper right corner using a blunt tip of a pencil. The setup panel appears again. 6 Tap the Remote Control icon . The Remote Control switches to Use mode. Why does a device respond to some RF signals and not to others? It is possible that a device does not respond properly when operated with RF signals. This is mostly due to IR signals that cannot be properly transmitted as RF signals. In that case, you have to reconfigure the Remote Control to operate the device with IR signals again. User Guide 50