Pioneer P5900DVD Owner's Manual - Page 18
Operating this unit
UPC - 012562848563
View all Pioneer P5900DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Section 03 Operating this unit 1 Touch the screen to activate the touch panel keys corresponding to each source. The touch panel keys appear on the display. # To go to the next group of touch panel keys, touch NEXT. # To return to the previous group of touch panel keys, touch PREV. 2 Touch HIDE to hide the touch panel keys. Note If you do not use the touch panel keys within 30 seconds, they will be hidden automatically when selecting video sources. Operating the menu 12 3 4 1 FUNCTION MENU key Touch to select functions for each source. 2 AUDIO MENU key Touch to select various sound quality controls. 3 SYSTEM MENU key Touch to select various setup functions. 4 ESC key Touch to cancel the control mode of functions. 1 Touch A.MENU to display MENU. The menu names are displayed and operable ones are highlighted. # When A.MENU is not displayed, you can display it by touching the screen. 2 Touch the desired key to display the function names you want to operate. # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. 3 Touch ESC to return to the display of each source. Opening and closing the LCD panel The LCD panel will be opened or closed automatically with the turning of the ignition switch on or off. You can turn off the automatic close/open function. (Refer to page 48.) ! Do not close the LCD panel with hands by force. That cause malfunction. ! The automatic close/open function will op- erate the display as follows. - When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after six seconds. - When the ignition switch is turned ON again (or turned to ACC), the LCD panel will be opened automatically. - Removing or attaching the front panel will automatically close or open the LCD panel. (Refer to page 13.) ! When the ignition switch is turned OFF after the LCD panel has been closed, turning the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE to open the LCD panel. ! When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage. 18 En