Pioneer P5900DVD Owner's Manual - Page 87

Available accessories Section 04 8 Plug the microphone into the microphone input jack on the multi-channel processor. Available accessories 3 Turn the ignition switch to ON or ACC. If the car's air conditioner or heater is turned on, turn it off. Noise from the fan in the air conditioner or heater may prevent correct auto TA and EQ. # Press SOURCE to turn the source on if this unit is turned off. 4 Select the position for the seat on which the microphone is placed. Refer to Using the position selector on page 78. # If no position is selected before you start auto TA and EQ, FRONT-L is selected automatically. 5 Press SOURCE and hold until the unit turns off. 6 Touch the screen to display the touch panel keys. 7 Touch and hold EQ to enter the auto TA and EQ measurement mode. For details concerning operation, refer to the multi-channel processor's operation manual. 9 Touch START to start the auto TA and EQ. 10 Get out of the car and close the door within 10 seconds when the 10-second count-down starts. The measurement tone (noise) is outputted from the speakers, and auto TA and EQ begins. # When all speakers are connected, auto TA and EQ is completed in about nine minutes. # To stop auto TA and EQ, touch STOP. # To cancel auto TA and EQ part way through, touch BACK or ESC. 11 When auto TA and EQ is completed, Complete is displayed. When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Understanding auto TA and EQ error messages on page 92.) 12 Touch ESC to cancel the auto TA and EQ mode. En 87