Ricoh P 311 Users Guide - Page 121

Configuring the Network Settings SNMPv3 Trap Item Description SNMPv3 Trap Select whether to enable the machine to send SNMPv3 traps to the management host (NMS). When disabled, [SNMPv3 Management Host 1] and [SNMPv3 Management Host 2] below become unavailable. SNMPv3 Account 1 Select either [User Account] or [Admin Account]. SNMPv3 Management Enter the IP address or host name of a management host. Can contain up to Host 1 64 characters. SNMPv3 Account 2 Select either [User Account] or [Admin Account]. SNMPv3 Management Enter the IP address or host name of a management host. Can contain up to Host 2 64 characters. SMTP Tab SMTP Item Description Primary SMTP Server Enter the IP address or host name of the SMTP/POP3 server. Can contain up to 64 characters. SSL/TLS Select whether or not to apply SSL/TLS encryption when sending emails to the SMTP server. Check the box to enable SSL/TLS. Port No. Enter the port number for SMTP (1 to 65535). If [SSL/TLS] is checked, Port 465 is automatically selected. (Otherwise, Port 25 is selected by default.) Authentication Method Select an authentication method from the following: [Anonymous]: The user name and password are not necessary. [SMTP]: The machine supports NTLM and LOGIN authentication. [POP before SMTP]: The POP3 server is used for authentication. When sending e-mails to an SMTP server, you can enhance the SMTP server security level by connecting to the POP server for authentication. User Name Enter the user name for logging in to the SMTP server. Can contain up to 32 characters. 119