Ricoh P 311 Users Guide - Page 88
Connects with one touch using WPS Wi-Fi Protected Setup. For details, see Setup Guide.
View all Ricoh P 311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
4. Configuring the Machine Using the Control Panel Displays the machine's MAC address. • Current Connection Displays detailed information about the connection, such as the SSID and the wireless signal strength. • Input SSID Input the SSID of the machine. • WPS Connects with one touch using WPS (Wi-Fi Protected Setup). For details, see Setup Guide. • PBC • PIN • Wi-Fi Direct Input the SSID of the machine to configure Wi-Fi Direct. • Wi-Fi Direct PWD Input SSID to set a password for Wi-Fi Direct. • Wi-Fi Direct Type Select 2.4 GHz or 5 GHz as the wireless LAN frequency. Default: [2.4 GHz] • 2.4 GHz • 5 GHz IPv4 Configuration • DHCP Sets the machine to receive its IPv4 address, subnet mask, and default gateway address automatically from a DHCP server. Default: [Active] • Inactive • Active • IP Address Specifies the machine's IPv4 address when DHCP is not used. Use this menu to check the current IP address when DHCP is used. Default: XXX.XXX.XXX.XXX The numbers represented by "X" vary according to your network environment. • Subnet Mask Specifies the machine's subnet mask when DHCP is not used. Use this menu to check the current subnet mask when DHCP is used. 86