Ricoh P 311 Users Guide - Page 123
Wireless Tab, If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected
View all Ricoh P 311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Configuring the Network Settings Wireless Tab Wireless LAN Status Item Description Wireless LAN Status Displays the status of the connection to the wireless LAN. MAC Address Displays the MAC address. Communication Mode Displays the communication mode that the machine is connecting in. SSID Displays the SSID of the access point that the machine is connected to. Wireless Signal Status Displays the strength of the wireless signal that is being received. Wireless Specifies whether or not to use the wireless LAN. This item appears when the wireless LAN option is installed on the machine. Wireless LAN Settings Item Description SSID Enter the SSID of the access point. The SSID can contain up to 32 characters. When you click [Scan List], a list of available access points is displayed. You can select the SSID from the list. Communication Mode [Infrastructure] is selected by default. Therefore, connect the machine to a wireless router or access point. Authentication Select an authentication method. Encryption Select an encryption method. WPA Passphrase If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected for [Authentication], enter the WPA encryption key. WEP Key Length If [WEP] is selected for [Encryption], select 64 bits or 128 bits for the length of the encryption key. WEP Transmit Key ID Select an ID number to identify each WEP key in case multiple WEP connections are configured. WEP Key Format Select a format for entering the WEP key. 121