Ricoh P 311 Users Guide - Page 190

Using a PIN Code, key to select [WPS], and then press the [OK] key.

Page 190 highlights

8. Configuring Network Settings 11. Check the result. • Connection has succeeded: "Connection to AP has Succeeded" is displayed. • Connection has failed: "Connection to AP has Failed" is displayed. Press the [OK] key to return to the screen displayed in Step 8. Check the configuration for the router (access point), then try the connection again. 12. Configuring the Wireless (Wi-Fi) settings is complete. Using a PIN Code A router (access point) is needed to set up a connection. To establish a connection using the PIN code, use a computer that is connected to the router (access point). Make sure the Ethernet cable is not connected to the machine. 1. Check that the router (access point) is working correctly. 2. Open the PIN code configuration window (web page) for the router (access point) on your computer. 3. Make sure the wireless LAN option is attached to the machine and the wireless (Wi-Fi) connection is enabled. 4. Press the [Menu] key. 5. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key. 6. Press the [Menu] key to enter the character-selection mode, and select a character of the password using the or [ ] key, and press the [OK] Key. When you finish entering the password, press the [OK] key. A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock] under [Admin. Tools] menu. 7. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and then press the [OK] key. 8. Press the [ ] or [ ] key to select [WPS], and then press the [OK] key. 9. Press the [ ] or [ ] key to select [PIN], and then press the [OK] key. 10. Check the PIN code. Write down the PIN code in case you might forget it. 11. Enter the machine's PIN code (8 digits) on the router (access point)'s web page (The web page accessed in Step 2). 12. Execute WPS (PIN system) from the router (access point)'s web page. 13. Press the [ ] or [ ] button to select [Connect], and then press the [OK] key. 188

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220

11.
Check the result.
Connection has succeeded:
"Connection to AP has Succeeded" is displayed.
Connection has failed:
"Connection to AP has Failed" is displayed.
Press the [OK] key to return to the screen displayed in Step 8.
Check the configuration for the router (access point), then try the connection again.
12.
Configuring the Wireless (Wi-Fi) settings is complete.
Using a PIN Code
A router (access point) is needed to set up a connection. To establish a connection using the PIN code,
use a computer that is connected to the router (access point).
Make sure the Ethernet cable is not connected to the machine.
1.
Check that the router (access point) is working correctly.
2.
Open the PIN code configuration window (web page) for the router (access point) on
your computer.
3.
Make sure the wireless LAN option is attached to the machine and the wireless (Wi-Fi)
connection is enabled.
4.
Press the [Menu] key.
5.
Press the [
] or [
] key to select [Network Settings], and then press the [OK] key.
6.
Press the [Menu] key to enter the character-selection mode, and select a character of the
password using the [
], [
], [
], or [
] key, and press the [OK] Key.
When you finish entering the password, press the [OK] key.
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock]
under [Admin. Tools] menu.
7.
Press the [
] or [
] key to select [Wireless (Wi-Fi)], and then press the [OK] key.
8.
Press the [
] or [
] key to select [WPS], and then press the [OK] key.
9.
Press the [
] or [
] key to select [PIN], and then press the [OK] key.
10.
Check the PIN code.
Write down the PIN code in case you might forget it.
11.
Enter the machine’s PIN code (8 digits) on the router (access point)’s web page (The web
page accessed in Step 2).
12.
Execute WPS (PIN system) from the router (access point)’s web page.
13.
Press the [
] or [
] button to select [Connect], and then press the [OK] key.
8. Configuring Network Settings
188