Ricoh P 311 Users Guide - Page 66
Continuing printing using mismatched paper, Canceling a Print Job
View all Ricoh P 311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3. Printing Documents • The paper size does not match the print job's settings when [Size Mismatch Detection] under [Tray Paper Settings] on the control panel menu is enabled. • The paper type does not match the print job's settings when [Input Tray:] is set to [Auto Tray Select] on the printer driver. There are two ways to resolve these errors: Continue printing using mismatched paper Ignore the error and print using mismatched paper. Cancel the print job Cancel printing. • For details about [Size Mismatch Detection], see page 82 "Tray Paper Settings Menu". • If [Auto Continue] under [System Settings] is enabled, the machine ignores the paper type and size settings and prints on whatever paper is loaded. Printing stops temporarily when the error is detected, and restarts automatically after about ten seconds using the settings made on the control panel. For details about [Auto Continue], see page 79 "System Settings Menu". Continuing printing using mismatched paper If the paper is too small for the print job, the printed image will be cropped. 1. While the error message is displayed, press the [OK] key. DYG401 Canceling a Print Job You can cancel print jobs using either the machine's control panel or your computer, depending on the status of the job. 64