Ricoh P 311 Users Guide - Page 133

Configuring the Administrator Settings Configuring the Administrator Settings Click [Administrator Tools] to display the page for configuring the administrator settings. This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore Setting], [Help Source File Setting], [Energy Saver Mode], and [PCL6 Mode]. Administrator Tab Administrator Settings Item Description New Password Enter the new administrator password. Can contain up to 16 characters. Confirm New Password Enter the same password again, to confirm. • To change the password, it is necessary to enter the current password. • The password must be specified during the Initial Setup, which is required after turning on the machine for the first time. For details, see Setup Guide. Note that the password is cleared when the settings are reset. Reset Settings Tab Reset Settings Item Description Reset Network Settings Select to clear the settings configured under the [Network Settings]. Reset Menu Settings Select to clear the settings that are not related to the network to their defaults. Reset Settings of Available Functions Select to clear the user restriction settings. Reset IPsec Settings Select to clear the IPsec settings. • [Reset IPsec Settings] appears only when the administrator password is specified. 131