Ricoh SP 8400DN User Guide - Page 47
Loading Paper into the Bypass Tray, and end fence. For details
![]() |
View all Ricoh SP 8400DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Loading Paper • Various sizes of paper can be loaded in the paper trays by adjusting the positions of side fences and end fence. For details, see "Changing the Paper Size in Paper Trays", Operating Instructions. • You can load envelopes in the paper trays. When loading envelopes, place them in the correct orientation. For details, see page 58 "Envelopes". Loading Paper into the Bypass Tray Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that cannot be loaded in the paper trays. • The maximum number of sheets you can load at the same time depends on paper type. Do not stack paper over the limit mark. For the maximum number of sheets you can load, see page 51 "Recommended Paper Sizes and Types". 1. Open the bypass tray. DUL008 2. Load the paper face down until you hear the beep. 3. Align the paper guides to the paper size. If the guides are not flush against the paper, images might be skewed or paper misfeeds might occur. 45
![](/manual_guide/products/ricoh-sp-8400dn-user-guide-f88327d/47.png)